background image
MAKE ANCHORS AND ATTACH GUY WIRES
You must provide some sort of anchors and guy wires to stabilize the rotor frame.Sturdiness and
structural integrity are important not only to protect the machine in high winds, but also to insure
minimum wear on the moving parts in ordinary winds.
Four or six of these concrete anchors will work well. If you substitute some other device, make
sure it will hold firmly in the ground against strong pulls that may be exerted by the machine and
frame in high winds.
Hot-form 1/2" thick steel rods to this shape.Start with about a 2' length for each piece.
<FIGURE 19>
11p26a.gif